- Aurora blu ray player doesnt play any sound movie#
- Aurora blu ray player doesnt play any sound tv#
Our French designer, Julien Haziza, drew inspiration from Japanese industrial designers and architecture – namely Shigeru Ban, Tadao Ando and the Omotesandō and Harajuku districts in Tokyo.Ĭlad in bamboo and elevated by a distinctive aluminium frame, the Aurora’s design is striking. Your music has never looked or sounded this awesome. If you have completed all of the steps and the issue is not resolved, service may be required.IFi Audio Aurora All-in-one music system that sounds as good as it looks.įor music lovers, pure and simple. The troubleshooting steps listed above should resolve your issue.
Aurora blu ray player doesnt play any sound tv#
If still unresolved, and if possible, try connecting to a different TV to determine whether or not the issue is with the Blu-ray Disc player. Select this when connecting an audio device that does not support Dolby Surround (Pro Logic) or DTS Neo:6. Stereo: Outputs audio signals without surround effects. Select this when connecting an audio device that supportsDolby Surround (Pro Logic) or DTS Neo:6. Surround: Outputs audio signals with surround effects. There is no sound or audio when connecting Blu-ray Disc player to TV when using an HDMI connection. On: Performs playback at a standard compression level. Other discs are played back at the On level. Auto: Performs playback at the dynamic range specified by the disc (BD-ROM only). Off: Outputs the sound with its original number of channels via the HDMI OUT jack. Cinema/Music: Outputs the simulated multi-channel sound from 2 channel sources via the HDMI OUT jack according to the capability of the connected device using DTS Neo:6. Off: Outputs the primary audio only.Select this to output HD audio signals to an AV amplifier (receiver). On: Outputs the audio obtained by mixing the interactive and secondary audio to the primary audio. Off: Outputs PCM signals from the HDMI OUT jack when playing a Super. On: Outputs DSD signals from the HDMI OUT jack when playing a Super Audio CD. PCM: Outputs PCM signals from the DIGITAL OUT (COAXIAL)/HDMI OUT jack. Outputs audio signals according to the status of NOTE: The following are Audio settings can be selected on the Blu-ray player menu: Aurora blu ray player doesnt play any sound movie#
Set the BD Audio Mix setting of the Blu-ray player to On if there is no sound once the movie started. If the volume is very low, select the Audio DRC or BD Audio Mix of the Blu-ray Disc player to Off. If the surround sound of the Blu-ray home theater system that is connected to the TV does not work, verify if the there is no audio from the rear speakers or if you can listen to the Dolby Digital technology 5.1 surround sound through your television. If using an amplifier with HDMI cable to connect the Blu-ray Disc player to the TV, set Audio (HDMI) or Digital Audio Output on the Blu-ray Disc player to PCM to see if the amplifier produces any sound. If the issue is unresolved, try replacing the HDMI cable. NOTE: This normally resolves playback issues with MPEG2 PS files. Turn the Blu-ray Disc player off and on again. Depending on the audio input available on the TV, use either a digital (optical or coaxial) or red & white analog cable. IMPORTANT: Since DVI inputs only support video signals, another cable type must be used to get the audio to the TV. If using a HDMI-to-DVI adapter or cable, connect a different cable to support the audio signal. Set the speaker output to AV AMP when using a BRAVIA television. If you have a video cable connected, in addition to the HDMI cable, then the TV may be set to the wrong video input. Ensure the picture displayed on TV is from the Blu-ray Disc player and that the TV is set to the appropriate HDMI video input. 
No sound is heard when using the HDMI connection from the Blu-ray Disc player.įollow the steps below to troubleshoot this issue: If you are using UBPX700, UBPUX70, UBPX800, UBPUX80 or UBPX1000ES, please also check the following Q&A.If model-specific information is required to complete any of the steps in this solution, refer to the operating instructions supplied with the product.
You are trying to play a MPEG2 Program Stream (PS) file.The TV may not be set to the appropriate HDMI video input.The connection uses a HDMI-to-DVI cable.The connection uses a HDMI-to-DVI adapter.The following may be reasons for not hearing any sound or audio when using a HDMI connection to connect a Blu-ray Disc player to the TV.
0 kommentar(er)
